Teltonika FMC001

Full description and configuration of Teltonika FMC001 tracker with server

Plug and play OBD tracker with LTE/GNSS/BLE

Configurator with a full launching description of the Teltonika FMC001

This is perfect tracker for a wide range of applications – fleet management of light commercial vehicles, car rental, leasing, driver log-book, insurance telematics and much more. Teltonika FMC001 is the first Plug and Track LTE OBD device with GNSS and Bluetooth connectivity. Possibility to read OBD II parameters, effortless installation and detailed accelerometer data provides a compelling solution. Device supports various Bluetooth Low Energy sensors, beacons, firmware and configuration update via Bluetooth.

FEATURES
Scenarios Green Driving, Over Speeding detection, GNSS Fuel Counter, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip, Sensors Accelerometer
Sleep modes GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep
Configuration and firmware update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration)
SMS Configuration,
GPRS commands Configuration,
Time Synchronization GPS, NITZ, NTP
Fuel monitoring OBD II
Ignition detection Accelerometer, External Power Voltage, Engine RPM

MODULE
Name Quectel EG91-EX, Teltonika TM2500
Technology LTE(CAT1)/3G(UMTS/HSPA)/2G(GSM/GPRS)/GNSS/BLUETOOTH
GNSS
GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS
Receiver 33 channel
Tracking sensitivity -165 dBM
Accuracy < 2.5m CEP
Hot start < 1 s
Warm start < 25 s
Cold start < 35 s

CELLULAR

Data transfer LTE: LTE FDD: Max 10Mbps (DL)/Max 5Mbps (UL)
UMTS: WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM: GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)
Data support SMS (text/data)
Technology LTE CAT1, UMTS/HSPA+ and GSM/GPRS/EDGE
2G bands EG91-EX: GSM: B3/B8
3G bands EG91-EX: WCDMA: B1/B8
4G bands EG91-EX: LTE FDD: B1/B3/B7/B8/B20/B28

BLUETOOTH
Specification 4.0 + LE
Supported peripherals Temperature and Humidity sensor, Inateck Barcode Scanner, Universal BLE sensors support

POWER
Input voltage range 10 – 30 V DC with overvoltage protection
Internal Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh)

INTERFACE
Connection OBDII Socket
GNSS antenna Internal High Gain
Cellular antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM Micro-SIM
Memory 128MB internal flash memory

OBD INTERFACE
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)

Data K-Line, CAN bus data
Data reading Up to 32 vehicle onboard parameters, supported OBD protocols:
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)

OPERATING ENVIRONMENT
Operating temperature
(without battery) -40 °C to +85 °C
Storage temperature
(without battery) -40 °C to +85 °C
Operating humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery charge temperature 0 °C to +45 °C
Battery discharge temperature -20 °C to +60 °C
Battery storage temperature -20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months

PHYSICAL SPECIFICATION
Dimensions 67,2 x 49,6 x 25 mm (L x W x H)
Weight 63 g