Teltonika FMU126

Full description and configuration of Teltonika FMU126 tracker with server

Real-time tracking terminal with 3G network coverage and fallback to 2G. Advanced 3G terminal for DLT project in Thailand.

Configurator with a full launching description of the Teltonika FMU126

Teltonika FMU126 is an advanced device with GNSS/Bluetooth and 3G modules, internal GNSS and internal 3G antennas. Teltonika designed a tracker to fulfil the requirements of Department of Land Transport (DLT) and deliver additional value for GPS telematics solution providers by high-end features:

  • Device is designed with RS232 interface for magnetic card reader and various third party external devices.
  • Additional +5V output allows you to save precious time of integration.
  • Buzzer on PCB will save cost of installation
  • BLE sensors and beacons – expands business opportunities dramatically;
  • More than 6 hours long life on internal battery collecting records every second
  • CAN adapters support to capture CAN data from any kind of transport

FEATURES

SMS Configuration,
GPRS commands Configuration,
Time Synchronization GNSS, NITZ, NTP
Fuel monitoring LLS (Analog), Digital LLS (RS232), LV-CAN200, ALL-CAN300, CAN-CONTROL, OBDII dongle
Ignition detection, Accelerometer, External Power Voltage, Engine RPM (CAN Adapters, OBDII dongle)
RS232 Modes Log Mode, NMEA, LLS, LCD, RFID HID/MF7, Garmin FMI, TCP ASCII/Binary, Magnetic card reader
Scenarios Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip, Sensors Accelerometer
Sleep modes
Configuration and firmware update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration)

MODULE
Name Quectel UC15-T, Teltonika TM2500
Technology 3G(UMTS/HSPA)/2G(GSM/GPRS)/GNSS/BLUETOOTH
GNSS
GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS
Protocol compatible NMEA, GGA, GGL, GSA, GSV, RMC, VTG
Receiver Tracking: 33/99 acquisition channels
Tracking sensitivity -110 dBM
Accuracy < 2.5m CEP
Hot start < 1 s
Warm start < 25 s
Cold start < 35 s

CELLULAR
Technology UMTS/HSPA
2G bands UC15-T: B5/B8/B3/B2
3G bands UC15-T: B5/B1
Data transfer UC15:HSDPA: Max. 3.6Mbps (DL)
UMTS: Max. 384Kbps (DL)/Max.384Kbps (UL)
GPRS: Max. 85.6Kbps (DL)/Max. 85.6Kbps (UL)
UG96:HSUPA: Max. 5.76Mbps
UMTS: Max. 384Kbps (DL)/Max.384Kbps (UL)
GPRS: Max. 107Kbps (DL)/Max.85.6Kbps (UL)
Data support SMS (text/data)

BLUETOOTH
Specification 4.0 + LE
Supported peripherals Temperature and Humidity sensor, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support

INTERFACE
Digital Inputs 2
Digital Outputs 2
Analog Inputs 1
CAN Adapter inputs 1
1-Wire 1
RS232 1
GNSS antenna Internal High Gain
Cellular antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM 2x SIM Card (Dual-SIM)
Memory 128MB internal flash memory

POWER
Input voltage range 10 – 30 V DC with overvoltage protection
Internal Back-up battery 1200 mAh Li-Ion battery 3.7 V (4.44 Wh)

PHYSICAL SPECIFICATION
Dimensions 65 x 56,6 x 20,6 mm (L x W x H)
Weight 55 g

OPERATING ENVIRONMENT
Operating temperature (without battery) -40 °C to +85 °C
Storage temperature (without battery) -40 °C to +85 °C
Operating humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery charge temperature 0 °C to +45 °C
Battery discharge temperature -20 °C to +60 °C
Battery storage temperature -20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months