• This topic is empty.
Viewing 1 post (of 1 total)
  • Author
  • #2406


    protocol gl200

    In order to use GPRS function, the user needs to set IP, Port and APN (access point
    name ) by either cell phone, or PC software.

    Server address:  –  the address to which the locator should be configured for cooperation with Teltonika Server Free

    Port 5004

    Example APN list link: https://www.teltonika.org/apn-list/
    If You can’t find your network APN in example list please contact Your SIM operator

    Check manufacturers manual how to send data to our server

    General Specifications
    Dimensions 3.1″ x 1.9″ x 1.02″
    Weight 2.5oz
    Backup Battery Li-Polymer 250 mAh
    Standby Time 90 hours (without reporting)50 hours (10 minutes reporting)48 hours (5 minutes reporting)
    Operating Voltage 8V to 32V DC
    Operating Temperature -30 ~ +80C (without battery)-40 ~ +85C for storage (with battery)

    GSM Specifications
    Frequency Quad band: 850/900/1800/1900 MHzCompliant to GSM phase 2/2+Class 4 (2W @ 850/900 MHz)Class 1 (1W @ 1800/1900 MHz)
    GPRS GPRS multi-slot class 12GPRS mobile station class B
    RMS Phase Error 5 deg
    Max Out RF Power GSM850/GSM900: 33.0±2 dBmDCS/PCS: 30.0±2 dBm
    Dynamic Input Range -15 ~ -108 dBm
    Receiver Sensitivity 0 Class II RBER 2% (-107 dBm)
    Stability Of Frequency < 2.5 ppm
    Max Frequency Error ±0.1 ppm

    GPS Specifications
    GPS Chipset 56-channel u-blox All-In-One GPS receiver
    Sensitivity Autonomous: -147 dBmHot start: -156 dBmReacquisition: -160 dBmTracking: -162 dBm
    Position Accuracy Autonomous: < 2.5mSBAS: < 2.0m
    TTFF (Open Sky) Cold start: 27s averageWarm start: 27s averageHot start: 1s average

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.