• This topic is empty.
Viewing 1 post (of 1 total)
  • Author
  • #2284



    protocol tk103

    In order to use GPRS function, the user needs to set IP, Port and APN (access point
    name ) by either cell phone, or PC software.

    Server address:  –  the address to which the locator should be configured for cooperation with Teltonika Server Free

    Port 5002

    Example APN list link: https://www.teltonika.org/apn-list/
    If You can’t find your network APN in example list please contact Your SIM operator

    Check manufacturers manual how to send data to our server

    SMS: *apn*AXXX*BXXX*CXXX* This command sets the Access
    Point Name. BXXX refers to user name, CXXX refers to password.
    If there is no user name and password required, send as *apn*AXXX*
    If there is user name but no password required, send as
    *apn*AXXX* BXXX*

    Hardware Specifications:
    Size: 110mm x55mm x 35mm
    Storage Temp: -40 to 85°C

    Operating Temp: -10 to 55°C
    GPS: U-BLOX G6010-ST, 50 channel
    Antennae: Internal
    Frequency: L1 1575.42 MHz
    Position Accuracy: <5m
    Tracking: –161 dBm
    Cold starts: –148 dBm
    Hot starts: –156 dBm
    Cold start: <27s
    Warm Start: <5s
    Hot Start: 1s
    A-GPS: AssistNow Online and AssistNow Offline services,
    OMA SUPL compliant
    GPRS: MTK 6260D
    Quad band; 850/900/1800/1900 MHz
    GPRS Class 12
    Antennae: Internal

    Power: Rechargeable, 4400 mAh, Lithium-Ion Battery

    Built-in Vibration/motion sensing

    • This topic was modified 1 year, 4 months ago by Admin1.
    • This topic was modified 1 year, 4 months ago by Admin1.
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.