TK10
protocol tk103
In order to use GPRS function, the user needs to set IP, Port and APN (access point
name ) by either cell phone, or PC software.
Server address: 85.25.213.72 – the address to which the locator should be configured for cooperation with Teltonika Server Free
Port 5002
Example APN list link: https://www.teltonika.org/apn-list/
If You can’t find your network APN in example list please contact Your SIM operator
Check manufacturers manual how to send data to our server
(VERY IMPORTANT AND MUST BE DONE 1ST) For the
device to send data to the server, this command MUST be enabled.
SMS: *apn*AXXX*BXXX*CXXX* This command sets the telecom Access
Point Name. BXXX refers to user name, CXXX refers to password.
If there is no user name and password required, send as *apn*AXXX*
If there is user name but no password required, send as
*apn*AXXX* BXXX*
Specification:
Model: TK10
Size: 160mm x64mm x 35mm
Weight: 386g
GPRS: MTK 6260D
Quad band: GSM 850/900/1800/1900 MHz
Antenna: Internal, GPRS Class 12
Power: Rechargeable, Lithium-Polymer Battery
Built-in Vibration/motion sensing
GPS: U-BLOX G7020-ST, 50 channel
Antenna: Internal
Position Accuracy: >=5m
Sensitivity: Tracking: (R)C161 dB, Cold starts: (R)C148 dB, Hot starts: (R)C156 dB
Cold start: <27s, Warm Start: <5s, Hot Start: 1s